Effects of hydroxyl radical induced oxidation on water holding capacity and protein structure of jumbo squid (Dosidicus gigas) mantle

Protein oxidation is considered as an important issue in food preservation process. In the present study, the potential influence of protein oxidation on water holding capacity and protein structure of jumbo squid (Dosidicus gigas) mantle was investigated. After the hydroxyl radical oxidation, it was found that the carbonyl, surface hydrophobicity and dityrosine content of myofibrillar protein significantly increased (P < 0.05), while the content of total sulphydryl decreased significantly (P < 0.01). Meanwhile, the fluorescence intensity of squid was weakened, and the maximum absorption peak of fluorescence red shift as the H₂O₂ concentration increased. The sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) showed that not only the protein cross-linking but also degradation could have occurred. The content of α-helix decreased, the content of β-sheet, β-turn and the unordered structures increased after oxidation. In addition, oxidation resulted in a decrease in water holding capacity. Taken together, oxidation resulted in the damage of the myofibrillar structure, the increase in muscle loss rate and the decrease in water holding capacity.     

Type-II AsP/Sc2CO2 van der Waals heterostructure: an excellent photocatalyst for overall water splitting

In this work, we explore the application potential of AsP/M₂CO₂ (M = Sc, Zr) van der Waals heterostructures in photocatalytic water splitting through the first-principles calculations. The calculated results show that AsP/Zr₂CO₂ heterostructure possesses an unfavorable type-Ⅰ band alignment, whereas AsP/Sc₂CO₂ exhibits a desirable type-Ⅱ band alignment, which is beneficial for separating the photogenerated electron-hole pairs. Also, the band edge positions of AsP/Sc₂CO₂ heterostructure stride the redox potential of water, ensuring favorable reaction kinetics. Besides, the strong optical absorption of AsP/Sc₂CO₂ heterostructure in both visible and ultraviolet regions (especially up to 10⁻⁶ cm⁻¹ at about 250 nm) makes it possible to utilize solar energy effectively. Meanwhile, AsP/Sc₂CO₂ heterostructure has an exciton binding energy as low as 0.09 eV, which quantitatively illustrates the high separation efficiency of photogenerated charge carrier. Thus, the type-Ⅱ band alignment, suitable band edge position, strong light absorption, and low exciton binding energy together indicate that AsP/Sc₂CO₂ heterostructure is a potential photocatalytic material. In addition, the obvious redshift phenomenon in the optical spectrum of AsP/Sc₂CO₂ heterostructure shows that biaxial strain can improve its light capture capability. Also, the interconversion between type-Ⅱ and type-Ⅰ can be achieved by applying different strains. All these findings suggest that the novel AsP/Sc₂CO₂ heterostructure has significant application prospects in next-generation photovoltaic and photocatalytic devices.     

Efficient overall water splitting over a Mo(IV)-doped Co3O4/NC electrocatalyst

To meet the demand of producing hydrogen at low cost, a molybdenum (Mo)-doped cobalt oxide (Co₃O₄) supported on nitrogen (N)-doped carbon (x%Mo–Co₃O₄/NC, where x% represents Mo/Co molar ratio) is developed as an efficient bifunctional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). This defect engineering strategy is realized by a facile urea oxidation method in nitrogen atmosphere. Through X-ray diffraction (XRD) refinement and other detailed characterizations, molybdenum ion (Mo⁴⁺) is found to be doped into Co₃O₄ by substituting cobalt ion (Co²⁺) at tetrahedron site, while N is doped into carbon matrix simultaneously. 4%Mo–Co₃O₄/NC is the optimized sample to show the lowest overpotentials of 91 and 276 mV to deliver 10 mA cm^?2 for HER and OER in 1 M potassium hydroxide solution (KOH), respectively. The overall water splitting cell 4%Mo–Co₃O₄/NC||4%Mo–Co₃O₄/NC displays a voltage of 1.62 V to deliver 10 mA cm^?2 in 1 M KOH. The Mo⁴⁺ dopant modulates the electronic structure of active cobalt ion (Co³⁺) and boosts the water dissociation process during HER, while the increased amount of lattice oxygen and formation of pyridinic nitrogen due to Mo doping benefits the OER activity. Besides, the smaller grain size owing to Mo doping leads to higher electrochemically active surface area (ECSA) on 4%Mo–Co₃O₄/NC, resulting in its superior bifunctional catalytic activity.     

Molecular dynamic investigation on sulfur migration during hydrogen production by benzothiophene gasification in supercritical water

Benzothiophene (BT) is a key sulfur-containing intermediate product in the thermal conversion process of coal and heavy oil. The migration process of the sulfur element may affect the thermal utilization design of BT. In this paper, BT was used as a model compound to simulate the supercritical water gasification (SCWG) process by molecular dynamics with a reactive force field (ReaxFF) method, and the laws of hydrogen production and sulfur migration mechanisms were obtained. Increasing the molecule number of supercritical water (SCW) and increasing the reaction temperature can enhance the generation of hydrogen and promote the conversion of organic sulfur to inorganic sulfur. Water was the main source of H₂, and H₂S was the main gaseous sulfur-containing product. SCW had a certain degree of oxidation due to a large number of hydroxyl radicals, which could increase the valence of sulfur. The conversion process of BT in SCW was mainly divided into four stages, including thiophene ring-opening; sulfur separation or carbon chain broke with sulfur retention; carbon chain cleaved, and gas generation. The lumped kinetic parameters of the conversion of sulfur in BT to inorganic sulfur were calculated, and the activation energy was 369.98 kJ/mol, which was much lower than those under pyrolysis conditions. This article aims to clarify the synergistic characteristics of hydrogen production and sulfur migration in the SCWG process of BT from the molecular perspective, which is expected to provide a theoretical basis for pollutant directional removal during hydrogen production by sulfur-containing organic matters in SCW.     

深圳抽水蓄能电站引水系统灌浆质量控制与分析

抽水蓄能电站引水系统灌浆质量控制,决定了水道系统渗水量的大小,关系到电站长期运行的经济指标及水道安全。详细介绍了深圳抽水蓄能电站灌浆参数的设计和灌浆中采取的管理措施与技术措施,分析了灌浆检测成果。电站投入运行以来,引水系统结构稳定,无渗漏。通过总结深圳抽水蓄能电站灌浆过程,对水道引水系统灌浆质量控制提出了几点建议,可供类似工程借鉴。     

Additive manufacturing of bipolar plates for hydrogen production in proton exchange membrane water electrolysis cells

Water electrolysis is a process that can produce hydrogen in a clean way when renewable energy sources are used. This allows managing large renewable surpluses and transferring this energy to other sectors, such as industry or transport. Among the electrolytic technologies to produce hydrogen, proton exchange membrane (PEM) electrolysis is a promising alternative. One of the main components of PEM electrolysis cells are the bipolar plates, which are machined with a series of flow distribution channels, largely responsible for their performance and durability. In this work, AISI 316L stainless steel bipolar plates have been built by additive manufacturing (AM), using laser powder bed fusion (PBF-L) technology. These bipolar plates were subjected to ex-situ corrosion tests and assembled in an electrolysis cell to evaluate the polarization curve. Furthermore, the obtained results were compared with bipolar plates manufactured by conventional machining processes (MEC). The obtained experimental results are very similar for both manufacturing methods. This demonstrates the viability of the PBF-L technology to produce metal bipolar plates for PEM electrolyzers and opens the possibilities to design new and more complex flow distribution channels and to test these designs in initial phases before scaling them to larger surfaces.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Promoted electrocatalytic hydrogen evolution performance by constructing Ni12P5–Ni2P heterointerfaces

Transition metal phosphides (TMPs) have been considered as cheap alternatives of precious metal platinum for electrochemical hydrogen evolution reaction (HER). In the past decades, many reports have indicated that the engineering of heterointerfaces between different components could efficiently enhance the activity of HER catalysts. Here, we report a facile method to construct Ni₁₂P₅–Ni₂P heterostructure by using a low temperature phosphorization strategy. The obtained Ni₁₂P₅–Ni₂P heterostructure shows high activity toward HER with an overpotential value of 166 mV at 10 mA cm^?2 and a Tafel slope of 60 mV dec^?1 in 0.5 M H₂SO₄. Compared with pure Ni₂P and Ni₁₂P₅, the Ni₁₂P₅–Ni₂P heterostructure has more active sites and faster HER kinetics due to the presence of the interfaces between Ni₁₂P₅ and Ni₂P. Furthermore, we used the obtained Ni₁₂P₅–Ni₂P as cathodic catalyst and IrO₂/Ti as anodic material to set up a proton exchange membrane (PEM) electrolyzer which shows good stability after 120 h continuous constant current electrolysis at 200 mA cm^?2. This work demonstrates the positive effect of heterostructure for HER catalysts and provides a feasible strategy for constructing earth-abundant electrocatalysts.     

水产品及养殖水中丁香酚类化合物风险研究

目的 检测水产品及养殖水中丁香酚类化合物。方法 应用食品补充检验方法BJS 201908《水产品及水中丁香酚类化合物的测定》，以海水鱼、淡水鱼、海水虾、淡水虾及养殖水作为基质，测定6种丁香酚类化合物的含量。结果 通过对实际样品测定后发现，在水产品中检出了丁香酚类化合物，主要为丁香酚，检出率为28.9%，其中海水鱼相对突出。结论 本研究为丁香酚作为渔用麻醉剂提供了方法论，为丁香酚类化合物在水产运输的合理使用提供理论依据。